Silicone Paints & Pigments
Silicone paints are applied on a silicone piece after this has been created. There are special silicone paints in a variety of colors. You can also create your own paint with a silicone paint base combined with the silicone pigments of your choice.
- Silicone Paint
- Silicone Paint Base
- FuseFX F-series
- FuseFX M-series
- FuseFX LY-series
- FuseFX trial kits
Silicone paints are pigments that are dispersed in a special silicone medium and that can be applied with brush or airbrush on a silicone object. For a good and convincing result they are often applied in layers (layering technique). It is advisable to pre-pigment the receiving piece with a base tone (before casting) as to enhance the effect of the applied layers of paint. Often additional effects are achieved by adding fibres (Form-Flock) and fillers.
Platinum Silicone paints have a natural glossy finish, so if you need to matt down the surface, WS Matting Powder is the way to go. FuseFX WS-Series Matting Powder is a unique blend of water base matting agents designed to eliminate the shine off of silicone painted surfaces, giving it a flat matt finish with little to no sheen. When used with M/F-110 Clear, the WS Matting Powder creates a little to no sheen surface. WS Matting Powder residue washes off clean with a little soap and warm water, dries clean and does not leave a "blue" tint to the surface unlike Cabosil.
Contains NO Amorphous Silca or Cabosil.
Another option is Silicone Finishing Powder; this can be topically applied to mattify your silicone surfaces after painting.
Psycho Paint is a versatile and easy to use platinum silicone paint base developed to help special effects and prosthetic artisans, doll makers, etc. easily create painted-on color effects for their platinum silicone creations. It is a two component translucent clear platinum-cure silicone that is used to make a base for color pigmenting. Once the desired color is attained, Psycho Paint is thinned with a solvent. Thin layers of paint can be then be applied to a model"s surface (made of Dragon Skin , Ecoflex or other platinum silicone) using an airbrush. It can also be applied by brushing. Colored Psycho Paint will bond to the model"s surface and offers good abrasion resistance. It is very strong and will stretch and bend with the model without cracking or peeling.
Fuse FX F-Series
The F-Series Silicone paints have been developed with the Special-FX Artists, Silicone Sculptors and Doll Artisans in mind. They contain a higher concentration of pigments for faster coverage, which is excellent for airbrush work. With a wide range of colors, the F-Series will make painting realistic skin tones and special-FX props more attainable for the novices and more convenient for the pros.
Fuse FX F-Series
Fuse FX F-Series_
Fuse FX M-Series
The M-Series paints are excellent for creating the most realistic skin tone effects. These precise colors are semi-transluscent and especially designed for intrinsic and extrinsic coloring.
FuseFX M Series
FuseFX M Series_
These LY-Series Colors (AKA Layering colors) are a sheer skin tone paint and are a vital part in creating the perfect Intrinsic or Extrinsic skin tone finish.
For extrinsic painting, it is generally applied after the vein and the Blush layers, resulting in a perfect "under-the-skin" look. Final colors are then applied to complete the skin effect. Use in corresponding FISC Silicone Pigments (AKA Functional Intrinsic Skin Colors). EX: S-301 Light Flesh color pigment is equivalent to LY-01 Light, S-304 Light Flesh color pigment is equivalent to LY-04 Light, etc....
FuseFX LY Series
FuseFX LY Series_
Fuse FX Trial Kits
TK- Series Trial Kits,
With 4 color bases, the new mini TK-Series Trial kit is a great way to discover FuseFX!
There are 15 grams bottle of silicone pigment (for about 1,400 grams Platinum silicone) and three 3 grams mini packs of color.
One 6 grams portion of mixed color (3 grams of "Color" and 3 grams of Part "A"), covers over 1 square foot of surface area when stippled by brush.
can be airbrushed too!
One customer reported that he had enough material in the kit to make 6 ear prosthesis.
PTK- Series Pro Trial 60 grams bottle kits,
This is the "big boys" trial kit! Everything needed to paint a beautiful skin tone.
The PTK-Series Trial Kit is a serious kit with larger volumes of FuseFX paints, you can do a lot of painting with this kit.
These new kits are now bigger with larger volume of paints, 60 grams per color.
Our SilTone silicone pigments are used with Psycho Paint Silicone Paint system to create amazing paint effects on silicone prosthetics and silicone body parts.
Designed to create life-like skintones opur Complete SilTone Kit has everything you need to get sarted with silicone painting! This kit Includes: Light and Medium Skintone, Mauve Tone, Freckle/Tan tone and Vein Blue and a set of Psycho Paint.
Silc Pig Silicone Pigments
are used for coloring tin-cure silicone rubber compounds such as Mold Max translucent T" Series products and platinum-cure silicones such as Dragon Skin and Ecoflex rubbers. Silc Pig also works well with Smooth-On"s skin effects systems such as Psycho Paint and Skin Tite .
Custom colors are possible by blending different Silc Pig colors. Attaining just the right color for your application may require trial and error testing. Small scale testing is recommended before using substantial amounts of material for any project.
Silc Pig pigments are very concentrated, so a little goes a long way when coloring Smooth-On silicone products. Recommended loading range is .001% to 3% of total silicone system weight.
Pre-mix Silc Pigpigment in container before dispensing as settling may have occurred.
Add Silc Pigcolorant to the Part A side of the silicone rubber system and mix well before adding Part B. Do not overload silicone rubber with Silc Pigor cure inhibition may occur.
Fuse FX S-Series
S-Series skin bases and SFX skin bases
These FISC Silicone Pigments (AKA Functional Intrinsic Skin Colors) are the fundamental basics of all human skin tones. Adding a few drops of these pigments to your clear Platinum silicone will give you an accurate foundation to mimic human flesh. Mixing ratio is 2 to 3 drops per 10 grams of catalyzed silicone, (2 drops of pigments for softer silicones or silicone with additives).
S-Series SFX pigments (AKA Functional Intrinsic Skin Colors) These are SFX base colors are great! What can I do with these colors? The names says it all...
These pigments go a long way. One 30 grams bottle can tint over 3,300 grams of catalyzed silicone (or approx. 7.2 pounds or 116.4 oz). While the 500 grams bottle can tint over 100,000 grams or 100 kilos (approx. 27 gallons or 220 pounds) or more depending on the softness of the silicone. Now THAT'S a lot of silicone!!!
Here's a link to S-Series pigment ratio to silicones: WS Matting Powder is the way to go. FuseFX WS-Series Matting Powder is a unique blend of water base matting agents designed to eliminate the shine off of silicone painted surfaces, giving it a flat matt finish with little to no sheen. When used with M/F-110 Clear, the WS Matting Powder creates a little to no sheen surface. WS Matting Powder residue washes off clean with a little soap and warm water, dries clean and does not leave a "blue" tint to the surface unlike Cabosil. Contains NO Amorphous Silca or Cabosil.
FuseFX S Series
FuseFX S Series_
Flock can be helpful in coloring translucent resins or rubbers to give more depth of color.
Silc Pig™ Electric Fluorescent Silicone Pigments are used for coloring tin-cure silicone rubber compounds such as Mold Max™ translucent ‘T’ Series products and platinum-cure silicones such as Dragon Skin™ and Ecoflex™ rubbers. Silc Pig™ Electric Fluorescent Pigments also work well with Smooth-On’s skin effects systems such as Psycho Paint™ and Skin Tite™. The fluorescent or “glow” effect is maximized under ultra-violet light or “black light.” The most dramatic color effect is realized when a Silc Pig™ Electric Fluorescent Pigment is used with a clear or translucent silicone.
What makes castings made with Silc Pig™ Electric Fluorescent Pigments appear to glow? When you add Silc Pig™ Electric Fluorescent Pigments to a silicone, more ultraviolet light from the cured material is visible to your eye vs. castings made with standard Silc-Pig™ pigments. Castings appear brighter in ambient light and appear to glow under UV light (black light).
Ignite Electric Pigments
Ignite Electric Pigments_
Silicone Art Materials pigments
Tom McLaughlin's excellent silicone pigments and accesories to pigment and paint any silicone surfaces - both tin and platinum. Vivid, silicone-safe pigments. No sulfur, no cadmium. Just about any color shade can be mixed with these pigments. All pigments are in the 'top rung' of permanence as far as 'synthetic' colors are concerned.
Mixing Info:SAM Silicone Colors have been formulated so 1% by weight (1 part color to 100 parts silicone -or- 1 small squirt to 1/2 cup silicone by volume) will give a good representation of that color in translucent silicone. For full color saturation use up to 5%, although 3% will probably be all you will ever need. Use 0.5% or less for translucent effects. For painting use up to 5% mixed into translucent silicone rubber, paint base or adhesive / caulking for general coloration, up to to 10% for intense opaque detail. Thin to proper consistency with appropriate solvent.
Glow Worm pigments
Glow Worm phosphorescent powders can be added to Smooth-On liquid plastics, rubbers and foams to create castings that glow in the dark after being charged with light. Choose from either green or blue.
What sets Glow Worm powders apart from other glow-in-the-dark powders? Used as directed and after being light charged as recommended, castings made with Glow Worm powders will glow in the dark at least 10 times longer than other glow powders.
Glow-in-the-dark castings are used for Halloween theming displays, home hobby projects, aquariums, store displays and more. These materials are also used for industrial marking, municipal safety applications and more.
Technical Bulletin Glow Worm
safety data sheet MSDS