FormCast Rhino
The Form Cast RHINO liquid plastic is an ultra low viscosity resin with ivory color. When properly used it will yield strong, detailed and bubble free castings. Vacuum degassing is not necessary. Form Cast Rhino is suitable for industrial use such as making foundry patterns, core boxes, vacuum forming tools and prototyping. This resin may be mixed with various fillers and dyes. Cured castings are strong and durable and resistant to moisture and mild solvents. They can be sanded, drilled, sawed and - after degreasing - painted. Typical uses include the manufacturing of prototypes, models, sculptures, decorative articles, anatomical models etc .
Technical Bulletin
FormCast Rhino
FormCast Rhino_
Features
very tough
high impact resistance
short demoulding time
low viscosity
mixing ratio 100 A - 100 B
viscosity 65 mPas
ivory color
working time approx. 3 minutes
demold time 0,5 - 1,5 hrs
shore hardness 72 D
e-Modulus 1000 MPa
impact resistance 26 kj / m2
FormCast Rhino resin testing
How to Use
Stir the individual components well before use. Weigh or measure both parts accurately and assemble in a clean and dry container and mix for 30 to 60 seconds. For the mixing cup, best use PP or PE plastic cups. Avoid contact with moisture as this will cause foam formation of the resin. When using Urefil filler, add these to the individual components and stir untill both have the same viscosity. Then let both of these components effortlessly blend together.