Rebound Silicone
Rebound silicone rubbers are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
3 to 4 layers are all that is necessary to make a strong, durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.) And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, etc.
Rebound 25 - Shore 25A hardness
Rebound 40 - Shore 40A hardness
Note: These products will not work with modeling clays containing sulfur under any circumstances.
Technical bulletin Rebound series
Rebound Series products
Rebound Series products_
Rebound Silicone Table
|
Product Name |
A:B mixing Ratio |
Demold Time |
Elongation at Break |
Mixed Viscosity |
Pot Life |
Shore A Hardness |
Tear Strength |
Weight cu.inch/lb |
|---|---|---|---|---|---|---|---|---|
|
Rebound 25 |
1:1 volume |
6 hours |
690% |
Brushable |
20 min |
25 |
102 pli |
23.5 |
|
Rebound 40 |
1:1 volume |
6 hours |
324% |
Brushable |
20 min |
40 |
106 pli |
23.5 |