Ease Release 2831 is a wax-based non-silicone release agent. It has proven to be effective when used to release polyurethane foams elastomers. Ease Release 2831 works with aluminum, steel, and elastomeric mold construction.
Technical bulletin Ease Release 2831
Ease Release 2831
Ease Release 2831_
Transport Regulated Goods
The transport of items out of this group can be restricted due to EU restrictions and regulations and will require a specialized carrier. Transport costs will not be automatically calculated. We will give you transport options and a quote later. Preparing this order for transport will not fit within our normal time frame and delivery may take a few days longer.
Safety - Use in a properly ventilated area ("room size ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Skin contact may cause dryness.
Store and use material at room temperature (73 F/23 C). This product has a limited shelf life and should be used as soon as possible.
SHAKE WELL BEFORE USING
Applying - Apply a coat of Ease Release 2831 with a spray or brush, and allow to dry. Rub Ease Release 2831 into mold surface with a clean cloth. Repeat two or three times to seal the mold surface. Start molding and reapply a light coat of Ease Release 2831 after each molding cycle.
Finishing - Thorough cleaning of the molded parts is recommended prior to bonding or any other post mold finishing.